Lenovo S20-30 / S20-30 Touch Hardware Maintenance Manual
1040 Fan assembly and Heat Sink assembly
For access, remove this FRU:
• "1010 Battery pack" on page 34
Figure 5. Removal steps of fan assembly and heat sink assembly
Loosen three screws
Unplug the fan connector in the direction shown by arrow
screws
When installing: Make sure that the fan connector is attached firmly to the
system board.
40
a
c
.
Step
Screw (quantity)
a
M2 × 3 mm, flat-head, nylok-coated (3)
M2 × 5 mm, flat-head, nylok-coated (2)
, and remove the heat sink assembly.
a
a
a
b
b
, Loosen three
c
c
c
Color
Torque
Black
1.35 kgfcm
Black
1.85 kgfcm