Ofrecido por www.electromanuales.com
Chapter 1
Camera front, side, and bottom
1
Flash.
2
Microphone.
3
Self-Timer light (see
4
Tripod mount.
5
Dock/USB connector—Provides direct and indirect (via optional dock) USB connectivity.
6
Battery/Memory Card door.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the batteries
1. Open the Battery/Memory Card door by sliding the
latch as indicated on the Battery/Memory Card
door.
2. Insert the two AA batteries.
3. Close the Battery/Memory Card door.
NOTE:
fully charge the batteries before using them the
first time (see
on page
removing the batteries.
Turn on the camera
To turn on the camera, press the
4
Getting started
6
5
"Using the Self-Timer setting" on page
If using rechargeable NiMH batteries,
"Recharging NiMH batteries"
43). Turn off the camera before
1
2
4
16).
button.
3