HP Photosmart M730 series User Manual page 38

Ofrecido por www.electromanuales.com
Chapter 9
My image is blurry.
• Use Focus Lock (see
• Use a tripod to hold the camera steady, or improve lighting conditions.
•
Use
Capture and Video Record menus" on page
• Set the flash to
Action.
My image is too bright.
• Turn the flash off (see
• Move back from the subject and use zoom.
My image is too dark.
• Wait for natural lighting conditions to improve, use the flash (see
on page
• If the subject you are trying to capture is outside the flash range, turn off the flash.
This causes a longer exposure time, so use a tripod or hold the camera steady. For
information about flash working distance for this camera, go to
support, select your language and region, enter your camera model number in the
Search: Product field, click Product Information, then click Specifications.
• Use Adaptive Lighting (see Adaptive Lighting under
and Video Record menus" on page
•
Use the
Picture Capture and Video Record menus" on page
My image is grainy.
• Add indirect lighting, use the flash (see
natural lighting conditions to improve.
•
Using
• You may have zoomed in too far using digital zoom (see
on page
• If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory. If so,
transfer the images to the memory card (see Move Images to Card under
Playback Menu" on page
36 Troubleshooting
"Using Focus Lock" on page
Steady Photo shooting mode (see Steady Photo under
Auto Flash or
"Setting the flash" on page
13), or add indirect lighting.
Spot setting for
Steady Photo shooting mode can increase graininess.
12).
20).
11).
14).
Flash On and set the shooting mode to
13).
14).
AE Metering (see AE Metering under
14.
"Setting the flash" on page
"Using the Picture
"Setting the flash"
www.hp.com/
"Using the Picture Capture
"Using the
13), or wait for
"Digital zoom"
"Using the