Memory Expansion - Toshiba Satellite P500 User Manual

Troubleshooting
Problem
External devices
connected to the
compatible ports do not
work.
The "USB WakeUp
function" does not work

Memory expansion

Refer also to Chapter 8,
memory modules.
Problem
The computer hangs up Make sure the memory module installed in the
9-14
Procedure
Some external devices may not work when
connected to a compatible port when the "USB
Sleep and Charge function" is [Enabled] in the
HW Setup.
Reconnect the external device after turning ON
the computer.
If the external device still does not work, connect
the device to an USB port that does not have the
USB Sleep and Charge function-compatible icon
( ) or change the "USB Sleep and Charge
function" setting to [Disabled] in the HW Setup.
When "USB Sleep and Charge function" is set to
[Enabled] in the HW Setup, the "USB WakeUp
function" does not work for ports that support the
USB Sleep and Charge function.
In that case, use an USB port that does not have
the USB Sleep and Charge function-compatible
icon ( ) or change the "USB Sleep and Charge
function" setting to [Disabled ] in the HW Setup.
Optional Devices, for information on installing
Procedure
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Turn off the power.
2. Disconnect the AC adaptor and all peripheral
devices.
3. Remove the battery pack.
4. Remove the memory module.
5. Replace the battery pack and/or connect the
AC adaptor.
6. Turn on the power.
If problems persist, contact your dealer.
User's Manual