Setting For Display Video On Hdmi; Settings For Audio On Hdmi; I.link (Ieee1394); Precautions - Toshiba Satellite P500 User Manual

Portable personal computer
Hide thumbs Also See for Satellite P500:
Table of Contents

Advertisement

Optional Devices

Setting for display video on HDMI

To view video on the HDMI device, be sure to configure the following
settings. Otherwise, you may find that nothing is displayed.
Be Sure to use the FN + F5 hot keys to select the display device before
starting to play video. Do not change the display device while playing
video.
Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.

Settings for audio on HDMI

To set the audio device to use the HDMI:
1. Click Start
Digital Output Device (HDMI)
To set the audio device to use the internal speakers:
1. Click Start
Speakers

i.LINK (IEEE1394)

i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
1. Digital video cameras
2. Hard disk drives
3. MO drives
4. CD-RW drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.

Precautions

1. Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer. TOSHIBA assumes no liability for such loss of data.
2. Do not transfer data in areas where static electricity is easily generated
or in areas subjected to electronic noise. Data can be destroyed.
3. If you are transferring data through an IEEE1394 hub, do not connect or
disconnect other devices from the hub during data transfer. There is a
likelihood that data will be damaged. Connect all devices to the hub
before you turn on the computer's power.
4. You may not use any copyrighted video or music data copied from a
video camera except for your personal enjoyment.
8-14
Control Panel
Hardware and Sound
Control Panel
Hardware and Sound
Set Default Device.
Set Default Device.
Sound
Sound
User's Manual

Advertisement

Table of Contents
loading

Table of Contents