System - D-Link DIR-600 User Manual

Section 3 - Coniguration
This section allows you to manage the router's coniguration settings, reboot the router, and restore the router to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created.
Save Settings to
Use this option to save the current router coniguration
Local Hard Drive:
settings to a ile on the hard disk of the computer you
are using. First, click the Save button. A ile dialog will
appear, allowing you to select a location and ile name
for the settings.
Load Settings from
Use this option to load previously saved router coniguration
Local Hard Drive:
settings. First, use the Browse option to ind a previously
saved ile of coniguration settings. Then, click the Upload
Settings button below to transfer those settings to the
router.
Restore to Factory
This option will restore all coniguration settings back
Default Settings:
to the settings that were in efect at the time the router
was shipped from the factory. Any settings that have
not been saved will be lost, including any rules that
you have created. If you want to save the current router
coniguration settings, use the Save button above.
Reboot Device:
Click to reboot the router.
Clear Language
If you previously installed a language pack and want to
Pack:
revert all the menus on the Router interface back to the
default language settings, click the Clear button.
D-Link DIR-600 User Manual

System

76