Static Ipv6 (Stateful) - D-Link DIR-600 User Manual

Section 3 - Coniguration
To conigure the Router to use a Static IPv6 Stateful connection, conigure the parameters in the LAN Address Autoconiguration
Settings section as described below:
Enable
Check to enable the Autoconiguration feature.
Autoconiguration:
Autoconiguration
Select the Stateful(DHCPv6) option from the drop-down
Type:
menu.
IPv6 Address Range
Enter the start IPv6 Address for the DHCPv6 range for your
Start:
local computers.
IPv6 Address Range
Enter the end IPv6 Address for the DHCPv6 range for your
End:
local computers.
IPv6 Address
Enter the IPv6 Address Lifetime (in minutes).
Lifetime:
Click the Save Settings button to save any changes made.
D-Link DIR-600 User Manual
IPv6

Static IPv6 (Stateful)

60