Clarion VX709 Owner's Manual & Installation Manual page 23

Setting/Ejecting a Disc
Setting a disc
1. Press the [0.] (OPEN/CLOSE) button to open
the operation panel.
2. Insert a disc into the center of the insertion
slot with the label side facing up.
The disc will automatically be drawn into the
DVD player.
After setting
a
disc
The system will automatically be switched to the
relevant source media mode according to the
disc, and start playing back the disc.
When a DVD video disc is set:
The system is switched to the OVD Video mode.
See "OVD Video Operations" (page 28).
When an Audio CD is set:
The system is switched to the CODA mode. See
"Audio CD Operations" (page 34).
When a CD/DVD with MP3IWMAlAAC/DivX
files is set:
The system is switched to the MP3IWMAlAAC
mode or DivX mode according to the Playform
setting. See "MP3IWMAlAAC Operations"
(page 36) or "OivX Operations" (page 39).
Note:
• Never insert foreign objects into the disc insertion
slot.
• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
• 8 cm (single play) discs cannot be used.
ACAUTION
For your safety, the driver should not insert
or eject a disc opening the operation panel
while driving.
Ejecting a disc
1. Press the [0.] (OPEN/CLOSE) button to open
the operation panel.
2. Press the
[~]
(EJECT) button to eject the
disc.
The screen changes to the DVD mode
screen, and "EJECT" appears.
• If a disc is left in the ejected position for 15
seconds, the disc is automatically reloaded
(Auto reload).
3. Remove the disc carefully.
Note:
• Ifyou force
a
disc into the insertion slot before auto
reloading, this can damage the disc.
VX709
21