Table of Contents
Advertisement
Printer Information
Epson LQ1050
Refer to the manual that came with your printer for the location of the DIP switches.
DIP Switch
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
4019 Datastream Modes
The 1483 supports two datastream modes for the 4019, Personal Printer Data Stream
(PPDS) mode and Hewlett-Packard (HP) Emulation mode.
In PPDS mode, the 4019 can print text and graphics from application software designed
to support IBM-compatible printers.
In HP Emulation mode, the 4019 can print text and graphics created from software based
on the Hewlett-Packard Printer Command Language (PCL) supported by HP LaserJet
Series II printers.
Refer to the documentation that came with your printer for instructions on how to set the
datastream mode.
A-4
Setting
Up (on)
USA Character set
Up (on)
USA Character set
Up (on)
USA Character set
Up (on)
Graphics table
Any
On = One direction; Off = Two directions
On = High speed draft turned off;
Any
Off = High speed draft turned on
On = Cut sheet feeder mode is on;
Any
Off = Cut sheet feeder mode is off
Down (off)
No skip over perforation
Any
1483 overrides form length
Any
1483 overrides form length
Down (off)
Parallel interface
Down (off)
Parallel interface
Down (off)
RS-232C is not used
Down (off)
RS-232C is not used
On = Short Tear-off mode is on
Any
Off = Short Tear-off mode is off
Down (off)
CR does CR only
Description
701344-003
Advertisement
Table of Contents
