Figure 8-3. Example Of Step Active Session; Figure 8-4. Example Of Swap Session - IBM 1483 Operator's Manual

Step Active Session
Press and hold the Alt key while you press the ChgSc key to change the active session to
make the next highest session the active session. Do not change the active session using
any other keystroke sequence. The session that is not selected is not affected.
For example, suppose three sessions are available. If Session 2 is the active session (the
cursor is in Session 2) and is on the top and Session 1 is on the bottom, press Alt-Change
Screen to increment the top to Session 3. Session 3 displays on the top and has the cursor.
Session 1 is still on the bottom (see Figure 8-3, below). If you press the Select Bottom
key, Session 3 is still displayed on the top and Session 1 is still displayed on the bottom,
but now Session 1 has the cursor.
Session 2
(active)
Session 1
(inactive)
Swap Session
Press and hold the Alt key while you press the Swap key to switch sessions without
moving the cursor. For example, in split mode, if the top session is the active session
(and has the cursor), press the Alt-Swap key combination to move the top session to the
bottom and the bottom session to the top. The session on the top is still the active session
and has the cursor (see Figure 8-4, below).
Session 1
(active)
Session 2
(inactive)
701344-003

Figure 8-3. Example of Step Active Session

Figure 8-4. Example of Swap Session

Operating the Split Screen Feature
Session 3
(active)
Session 1
(inactive)
Session 2
(active)
Session 1
(inactive)
8-5