Setting The Duration Function (Main Oven Only) - Baumatic BAO6008-P Instruction Manual

Setting the duration function (main oven only)

This function will allow you to set a countdown time similar to
the minute minder function. However the oven will no longer
continue to heat, once the countdown period has elapsed.
o Use the main oven thermostat control knob (15) to set the
temperature that you require. The manual operation symbol
(18) will appear on the display.
o Use the main oven function selection knob (13) to select the
mode of cooking that you require.
o It is then possible to set the duration of the cooking time that
you require.
o Press the "duration" button (6) and the display will show a value
of 00:00. Set the period of time that you wish the duration
function to countdown for, by using the "minus" (9) and "plus"
(10) buttons.
o Once the display has got to your desired countdown time, let go
of the "minus" and "plus" buttons. The countdown will start
immediately and the word AUTO will appear on the timer display.
o Once a countdown time has been set, it is possible to shorten or
lengthen the time by using the "minus" or "plus" buttons.
o An alarm will sound when the countdown time has elapsed and
the oven will switch off. The word AUTO will flash and the
heating symbol will disappear.
o To silence the audible signal and return the oven to manual
operation mode, once the duration function has been used. You
should press the "manual operation" button, the word AUTO will
disappear from the display and the manual operation symbol will
appear instead.
o Important: If you do not turn the thermostat control knob and
main oven function selection knob to 0. Then the appliance will
continue to operate as soon as you press the "manual operation"
button.
13