Recording Setup; Configuring Recording Resolution, Frame Rate, And Image Quality - Lorex LNR200 netHD Series Instruction Manual

Record
6 (Optional) To copy the schedule to other cameras, click Copy. Check cameras you would like
to copy the schedule to. Check/un-check IP Camera to copy the schedule to all cameras.
Click OK to copy the schedule.
7 Click Apply to save changes. Right-click repeatedly to return to live view.

Recording Setup

Use the Recording Setup to configure recording and streaming parameters for your
cameras such as the resolution, frame rate, network bandwidth, and event pre and
post-recording durations.
The Encoding Settings are set separately for Continuous and Event (motion) recording.
They may also be set for remote streaming to a computer or mobile device through the
Substream tab.

Configuring Recording Resolution, Frame Rate, and Image Quality

The resolution, frame rate, and image quality can be set separately for each camera, as
well as for continuous and motion recording.
To configure the recording resolution, frame rate, and image quality:
1 Right-click and then click Menu>Record>Recording Setup.
2 Under Camera, select the camera you would like to configure.
3 Configure the following settings under Mainstream (Continuous) to set the parameters for
continuous recording:
• Under Resolution, select the recording resolution of the camera: 1280*720 (720P) or
1920*1080 (1080P).
• Under Video Quality, select the video quality from Lowest to Highest.
• Under Frame Rate, select the recording frame rate.
46