Step 4 Of 4: Connect To The Ddns Address In The Client Software - Lorex LNR200 netHD Series Instruction Manual

Setting up your NVR for Remote Connectivity

Step 4 of 4: Connect to the DDNS Address in the Client Software

NOTE: Please allow 10~15 minutes for the DDNS servers to update with your new DDNS address
before attempting to connect.
Finally you must connect to the NVR's DDNS address. You will use the DDNS address
whenever you want to connect to your NVR over the Internet.
To connect to the NVR's DDNS address:
1 Install the Client Software for PC on a remote computer, and double-click the desktop icon
( ) to open.
2 The Add NVR Wizard opens. Click Enter Wizard.
NOTE: If the Add NVR Wizard doesn't open, click Help>Open Wizard.
3 Click Add.
4 Configure the following:
• Nickname: Enter a name for your NVR of your choice (e.g. home or office).
• IP/DDNS: Enter the Domain Name/URL Request from the confirmation email, followed by
.lorexddns.net. For example, if your Domain Name/URL Request is
tomsmith.lorexddns.net
NOTE: If you have changed the Client Port, User Name, or Password from the defaults, you
must update them to connect to the NVR.
5 Click Add.
6 Click Next 3 times, then click Finished. The NVR opens in Main View and streams video from
your cameras.
NOTE: If Main View does not open, click Control Panel>Main View to open the Main View menu.
84
.
Enter a name for your NVR
Enter Domain Name/URL Request,
followed by .lorexddns.net
Click Add
tomsmith , enter