Slope - Suunto X6hr Instruction Manual

Wristop computer

Hide thumbs Also See for X6hr:

Table of Contents

4. Set the degrees with the arrow buttons. The initial value is either 0.0° or the value

accepted when last setting the declination.

5. Press Suunto . You return to the compass menu.

3.3.5. Slope

The slope function measures the degree of slope.

To measure the slope:

1. In the Function menu, scroll to Slope with the arrow buttons and press Suunto . When

you incline Suunto X6

screen.

2. When the angle is selected, lock it by pressing Start . The angle remains on the

display.

3. To unlock the angle and start measuring the slope again, press Start .

4. To move back to the Function menu, press Suunto .

NOTE: The measured value is not saved in the Suunto X6

mode.

NOTE: The slope function does not work when the heart rate is being measured. Instead

of the angle, "- -" is displayed.

NOTE: The measuring range is up to 60° or 173 %. After this, "—-" is displayed.

, it displays the angle indicating the degree of slope on the

memory in the Compass

Table of Contents