Transmission Oil - KYMCO DINK 125 Owner's Manual

TRANSMISSION OIL

Oil change
1. Place the scooter in its center stand.
2. Place a drain pan under the drain bolt (1).
3. Remove the transmission oil drain bolt.
4. Remove the transmission oil filler bolt (2), slowly turn the rear wheel and drain the oil.
After draining the oil completely, install the oil drain bolt with a new sealing washer and tighten it.
Torque: 13 N-m (1.3 kgf-m, 9.5 lbf-ft)
5. Fill the transmission case with recommended oil.
Recommended transmission oil: SAE 90
Oil capacity (at draining):
6. Install the transmission oil filler bolt with a new sealing
washer and tighten it.
Torque: 13 N-m (1.3 kgf-m, 9.5 lbf-ft)
0.18 liter (0.2 US qt, 0.16 lmp qt)
66
(2)
(1)