Determining Current Scsi Hard Disk Drive Addresses - IBM Ultra320 Installation And Using Manual

Determining Current SCSI Hard Disk Drive Addresses

Hard disk drive backplanes or external subsystems automatically set the SCSI address for you. Refer to
the documentation for your system or external subsystem for their locations. For future reference, be sure
to keep a list of all the SCSI addresses you use and the channels to which they are connected.
To determine the SCSI addresses of any installed hard disk drives, start the RAID manager program and
list the attached physical drives. For an AIX system, see PCI-X SCSI RAID Controller Reference Guide for
AIX, order number SA23-1323. For a Linux system, see PCI-X SCSI RAID Controller Reference Guide for
Linux, order number SA23-1327. If you have another operating system installed, refer to your operating
system documentation for the correct procedures.
Notes:
1. The priority of SCSI addresses for the PCI-X Dual Channel Ultra320 SCSI RAID Adapter is not in
sequential order. The order of priority is 7 through 0 and 15 through 8.
2. Address 7 is reserved for the adapter.
36
PCI-X Dual Channel Ultra320 SCSI RAID Adapter: Installation and Using Guide