Verifying The Installation - IBM Ultra320 Installation And Using Manual

Ibm pci-x dual channel scsi raid adapter installation and using guide
Hide thumbs Also See for Ultra320:
Table of Contents

Advertisement

Verifying the Installation

Verify the initial installation by using the following procedures:
v Verifying Linux Software Installation
v Verifying Hardware Installation
Verifying Linux Software Installation
Software for the PCI-X Dual Channel Ultra320 SCSI RAID Adapter consists of a device driver and a set of
utilities. This software is provided with the supported Linux distribution, and should have been installed
along with the operating system.
Verify the initial software installation by using the following procedures:
v Verifying Device Driver Version (ibmsis)
v Verifying Utility Version (sisconfig)
Verifying Device Driver Version: The PCI-X Dual Channel Ultra320 SCSI RAID Adapter requires
Version 1 Revision 19 (or later) of the ibmsis device driver. To verify the version number of ibmsis, do the
following:
1. If necessary, log in as root user.
2. Type:
modinfo ibmsis
Press Enter.
3. Type:
strings filename | grep "ibmsis version"
where filename is the file name displayed after the modinfo command was typed in the previous step.
Press Enter.
The following is an example of the data that displays on your screen:
ibmsis version=Ver. 1 Rev. 19.10 SMP
Note: The version displayed in the example might be different from the output displayed on your screen.
If the version displayed is not at the recommended level and updates are needed, obtain them from your
Linux distributor or download them from the IBM Support Web site. The Web address is:
http://www6.software.ibm.com/dl/linuxsdd/linuxsdd-p.
Verifying Utility Version: The PCI-X Dual Channel Ultra320 SCSI RAID Adapter requires Version 1
Revision 19 (or later) of the sisconfig utility. To verify the version number of the sisconfig utility, do the
following:
1. If necessary, log in as root user.
2. Type:
sisconfig --version
Press Enter.
The following is an example of the data that displays on your screen:
sisconfig: Ver. 1 Rev. 19.10
Note: The version displayed in the example might be different from the output displayed on your screen.
Chapter 7. Installing and Setting Up Software for the PCI-X Dual Channel Ultra320 SCSI RAID Adapter (Linux )
23

Advertisement

Table of Contents
loading

Table of Contents