Contents; Product Checking And Parts Identification - Mitsubishi Electric FR-S500 Series Instruction Manual

Product Checking and Parts Identification

Unpack the inverter and check the capacity plate on the front cover and the rating
plate on the inverter side face to ensure that the product agrees with your order and
the inverter is intact.
Parts and name plate
Operation panel
Front cover
Inverter type
FR -
Symbol Voltage class
S520E Three-phase 200V class
S540E Three-phase 400V class
S510WE Single-phase 100V class
Removal and reinstallation of the
front cover
Remove the front cover by pulling it
toward you in the direction of arrow.
To reinstall, match the cover to the
inverter front and install it straight.
Removal and reinstallation of the wiring cover
The cover can be removed easily by pulling it toward
you.
To reinstall, fit the cover to the inverter along the guides.
RS-485 communication connector
When using the RS-485 connector to wire the cable, you
can cut off the tab of the wiring cover to wire it. (Cutting off
the tab will provide protective structure IP10.)
CAUTION
The connector above the operation panel is for
manufacturer use. Do not touch it as doing so may
cause an electric shock.
Wiring cover
S520E - 0.1
Inverter
capacity
"kW"
Rating plate
Inverter type
Input rating
Output rating
Serial number
Capacity plate
K - NA
FR-S520E-0.1K to 0.75K-NA
FR-S510WE-0.1K to 0.4K-NA
1
FR-S520E-0.1K-NA
FR-S520E-0.1K-NA XXXXXX
Inverter type Serial number
FR-S520E-1.5K to 3.7K-NA
FR-S540E-0.4K to 3.7K-NA
FR-S510WE-0.75K-NA
Tab
Wiring cover