Gigabyte GA-8I945P-G-RH User Manual page 37

USB Controller
Enabled
Disabled
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
Azalia Codec
Auto
Disabled
Onboard H/W GigaRAID
Enabled
Disabled
GigaRAID Function
RAID
ATA
Onboard H/W LAN
Enabled
Disabled
OnBoard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Disabled
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
i-Lock
Enabled
Disabled
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
Enable USB Keyboard Support.
Disable USB Keyboard Support. (Default value)
Enable USB Mouse Support.
Disable USB Mouse Support. (Default value)
Auto detect Azalia audio function. (Default value)
Disable Azalia audio function.
Enable Onboard H/W GigaRAID function. (Default value)
Disable this function.
Select onboard GigaRAID chip function as RAID. (Default value)
Select onboard GigaRAID chip function as ATA.
Enable Onboard H/W LAN function. (Default value)
Disable this function.
Enable this function.
Disable this function. (Default value)
BIOS will automatically setup the port 1 address.
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
Enable onboard Serial port 1 and address is 2F8/IRQ3.
Enable onboard Serial port 1 and address is 3E8/IRQ4.
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Enable the i-Lock function. (Default value)
Disable this function.
- 37 - BIOS Setup