Sony HT-SF2300 Operating Instructions Manual page 31

5
Press
+,+
repeatedly to select
"T. TONE Y".
The test tone is output from each speaker
in sequence as follows:
Front left -+ Center -+ Front right -+
Surround right -+ Surround left-+
Subwoofer
6
Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see "Adjusting the level
(LEVEL menu)" (page 39).
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/-. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
To turn off the test tone
Repeat steps 1 to 5 above. Then, select
"T. TONE N" in step 5.
You can also press any input buttons.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
31
GB
•
Q
~
::::s
cc
en
-
Q )
~
C' D
Q.