Sony PlayStation PSP-1003 Instruction Manual page 78

Sending and receiving images
You can transfer images with another PSP
( page 113). The steps for the sender and the receiver are different.
1
Set up for Ad Hoc Mode (both sender and receiver).
1 Turn on the WLAN switch on the left side of the PSP
( page 22).
2
Prepare to receive the image (receiver).
1 Under
image, and then press the
2 Select "Receive", and then press the
The system is now ready to receive an image.
3
Send the image (sender).
1 Under
button.
2 Select "Send", and then press the
The nicknames for PSP
3 Select the system to send to, and then press the
The system starts to send the image.
4
Save the image received (receiver).
After the transfer has been completed, the image that was received is
displayed on the screen.
1 With the image displayed, press the
A confirmation message is displayed.
2 Select "Yes", and then press the
Hints
• The location where an image is saved depends on your selection in step 2-1. Note that you
cannot save images in the Digital Camera Images folder.
• You can also transfer images using the on-screen control panel (
78
Photo options menu
Sender
, select the icon for the location where you want to save the
, select the image that you want to send, and then press the
systems ready to receive an image are displayed.
®
system using Ad Hoc Mode
®
Receiver
button.
button.
button.
button.
button.
system
®
button.
page 72).