D-Link DIR-655 User Manual page 113

Appendix B - Networking Basics
Statically.Assign.an.IP.address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step.1
7 - Click on Start.>.Control.Panel.>.Network.and.Internet.>.Network.and.Sharing.Center.
Windows
®
- Click on Start > Control.Panel > Network.and.Internet > Network.and.Sharing.Center > Manage.Network.Connections.
Windows Vista
®
Windows XP - Click on Start > Control.Panel > Network.Connections.
Windows 2000 - From the desktop, right-click My.Network.Places > Properties.
Step.2
Right-click on the Local.Area.Connection which represents your D-Link network adapter and select Properties.
Step.3
Highlight Internet.Protocol.(TCP/IP) and click Properties.
Step.4
Click Use.the.following.IP.address and enter an IP address that is on the same subnet as your network
or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a
number between 2 and 99. Make sure that the number you choose is not in use on the network. Set
Default Gateway the same as the LAN IP address of your router (192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not
needed or you may enter a DNS server from your ISP.
Step.5
Click OK twice to save your settings.
D-Link DIR-655 User Manual 109