This manual covers vehicles that have been
recommended for carrying the spreader. Please see
your local dealer for proper vehicle applications.
CERTIFICATION
WARNING
New untitled vehicle installation of a spreader
requires National Highway Traffic Safety
Administration altered vehicle certification
labeling. Installer to verify that struck load of
snow or ice control material does not exceed
GVWR or GAWR rating label and complies
with FMVSS.
APPROXIMATE MATERIAL WEIGHTS
CAUTION
Read and adhere to manufacturer's
ice‑control material package
labeling, including Material Safety
Data Sheet requirements.
Lit. No. 94430/94431, Rev. 07
Plus approximate base unit weights of 154 lb for Model 1000
and 161 lb for Model 2000, including mount.
LOADING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
ratings as found on the driver-side vehicle
door cornerpost.
NOTE: If spreader and ice‑control material loading
is in doubt, weigh vehicle for compliance with
vehicle ratings.
NOTE: Use only dry, free‑flowing granular
materials with this spreader. Damp or wet
ice-control materials and other products may not
spread properly.
Model 1000
cu ft
8.0
5.9
3.1
Very Coarse = 35 lb/cu ft
11
WARNING
Model 2000
cu ft
lb
320
10.6
236
7.2
124
3.1
Salt = 40 lb/cu ft (avg.)
Coarse = 45 lb/cu ft
Fine = 50 lb/cu ft
lb
424
288
124
January 15, 2014