Subaru Legacy 2003 Service Manual page 6

MECHANICAL
(3) Remove the pipe with bracket.
(4) Remove the bolts which install power steer-
ing pump bracket.
(5) Remove the power steering tank from the
bracket by pulling it upward.
(6) Place the power steering pump on right side
wheel apron.
14) Remove the front and center exhaust pipe.
<Ref. to EX(H4SO)-5, REMOVAL, Front Exhaust
Pipe.>
ENGINE ASSEMBLY
15) Remove the nuts which hold lower side of
transmission to engine.
ME-00331
16) Remove the nuts which install front cushion
rubber onto front crossmember.
FU-00139
17) Separate the torque converter clutch from drive
plate. (AT vehicles)
(1) Lower the vehicle.
(2) Remove the service hole plug.
(3) Remove the bolts which hold torque con-
verter clutch to drive plate.
(4) Remove other bolts while rotating the en-
gine using socket wrench.
FU-00020
FU-00140
ME(H4SO)-34
ME-00210
ME-00211
ME-00212