Belt Cover - Subaru Legacy 2003 Service Manual

14.Belt Cover

A: REMOVAL
1) Remove the V-belt. <Ref. to ME(H4SO)-41, RE-
MOVAL, V-belt.>
2) Remove the crankshaft
ME(H4SO)-43, REMOVAL, Crankshaft Pulley.>
3) Remove the belt cover (LH).
4) Remove the front belt cover.
( B )
(A) Belt cover (LH)
(B) Front belt cover
B: INSTALLATION
1) Install the front belt cover.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
2) Install the belt cover (LH).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
( B )
(A) Belt cover (LH)
(B) Front belt cover
3) Install the crankshaft
ME(H4SO)-43, INSTALLATION, CRANKSHAFT
PULLEY.>
4) Install the V-belt. <Ref. to ME(H4SO)-42, IN-
STALLATION, V-belt.>
C: INSPECTION
Make sure the cover is not damaged.
BELT COVER
pulley. <Ref. to
( A )
ME-00229
( A )
ME-00229
pulley. <Ref. to
ME(H4SO)-45
MECHANICAL