Plasmacluster Operation; One-Hour Off Timer - Sharp AY-AP9KR Operation Manual

PLASMACLUSTER OPERATION

Plasmacluster ions released into the room will
reduce some airborne mold.
1
During operation, press the
PLASMACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp on the
unit will light up.
TO CANCEL
Press the PLASMACLUSTER button again.
• The PLASMACLUSTER lamp on the unit will turn
off.
NOTE:
• Use of the PLASMACLUSTER operation will be
memorized, and it will be activated the next time
you turn on the air conditioner.
• To turn off the PLASMACLUSTER lamp, press the
DISPLAY button.
• To perform Plasmacluster operation in FAN only
mode, press the PLASMACLUSTER button when
the unit is not operating. The mode symbol of the
remote control will go off and the fan speed can
not be set AUTO.

ONE-HOUR OFF TIMER

When the ONE-HOUR OFF TIMER is set, the unit
will automatically turn off after one hour.
1
Press the ONE-HOUR OFF TIMER
button.
".
• The remote control will displays "
• The orange TIMER lamp (
• The unit will stop operating after one hour.
1
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
turn off.
Alternatively, turn the unit off by pressing the
ON/OFF button.
• The red OPERATION lamp (
TIMER lamp (
NOTE:
• The ONE-HOUR OFF TIMER operation has
p r i o r i t y o v e r T I M E R O N a n d T I M E R O F F
operations.
• If the ONE-HOUR OFF TIMER is set while the unit
is not operating, the unit starts one-hour operation
at the formerly set condition.
• If you wish to operate the unit for another hour
before the ONE-HOUR OFF TIMER is activated,
press the ONE-HOUR OFF TIMER button again
during operation.
GB-8
light up.
) on the unit will turn off.
".
) on the unit will
1
CANCEL
) on the unit will
) and the orange