Hardware Configuration; Configuration Options - Carrier Non-Programmable Thermostats Installation, Start-Up, And Operating Instructions Manual

N O N -PR O G RAM MABL E T HE RM OS TAT C O NFI G UR ATI O N R E CO R D
Owner/Operator
A) Hardware Configuration
R19 Resistor located on Model HP and 2S only. (Uncut = Enable Heat Pump Operation,
Cut = Air Conditioner Operation)
No R19 Resistor present. (Model AC thermostat only)
B) Mode Settings
Mode (Off, Heat, Cool, Auto, Eheat)
Heating Set Point Value
Cooling Set Point Value
Fan (Auto or On)
C) Configuration Options
1 Anticipator (1-9: factory default = 3)
2 Clean Filter Timer (Off or 1-9: factory default = 2)
3 Fahrenheit or Celsius (F or C: factory default = F)
4 Fan On with W (Off or On: factory default = Off)
5-6 N/A
7 Zoning Selection (Off or On: factory default = Off)
8 Auxiliary Heat Lockout (Off or 5-55 F: factory default = Off)
9-12 N/A
13 Room Temperature Offset (-5 to +5: factory default = 0)
14 N/A
15 Enable Auto Mode (Off or On: factory default = On)
Copyright 1998 CARRIER Corp. • 7310 W. Morris St. • Indianapolis, IN 46231
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1 4
PC 101
Tab misc. misc.
Catalog No. 03TS-TA5 Printed in U.S.A.
Thermostat Model No.
Form TSTAT-16SI
Date
Pg 12 10-98 Replaces: TSTAT-14SI
A98468
tstat16si