Power On Display - Toshiba L3 User Manual

3. Click the OK button. If the character string you enter matches the
If you enter the password incorrectly three times in a row, the computer
needs to be shut off
You will not be able to access the password option in the HW Setup. In this
case you must turn the power off and back on to retry the procedure.
4. Follow the same procedures described in the earlier section, How to
Display
This tab allows you to customize your computer's display settings for either
the internal LCD screen or for an external monitor.

Power On Display

Allows you to set the display to be used when the computer is booted.
Auto-Selected
LCD + Analog RGB
CPU
Dynamic CPU Frequency Mode.
This option allows you to choose from the following settings:
Dynamically
Switchable
Always Low
User's Manual
registered password, the password option is reset and the display
changes to:
Not registered
If they do not match, the following message appears. You must repeat
step 1.
Incorrect Password!!!
set the password, to set a new user password.
Selects an external monitor if one is connected,
otherwise, it selects the internal LCD display
(Default).
Selects both the internal LCD and an external
monitor for simultaneous display.
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary.
(Default)
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
L350/L350D
7-3