Operation Mode - LG LS-J0762YL Service Manual

Name and Function-Remote Control
The remote control transmits the signals to the system.
Remote Control
5
6
4
2
7
ON OFF
11
8
13
15

Operation Mode

Cooling Operation
Auto operation or Auto changeover
Healthy Dehumidification Operation
Heating Operation
• Cooling Model( ), Heat Pump Model(
Signal transmitter
1
3
10
CANCEL
9
SET
12
AUTO CLEAN
17
14
16
Flip-up door
(opened)
)
START/STOP BUTTON
1
Operation starts when this button is pressed and stops
when the button is pressed again.
OPERATION MODE SELECTION BUTTON
2
Used to select the operation mode.
ROOM TEMPERATURE SETTING BUTTONS
3
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
4
Used to select fan speed in four steps, low, medium,
high and CHAOS.
JET COOL / HEAT
5
Used to start or stop the speed cooling or heating.
(Speed cooling or heating operates super high fan
speed in cooling or heating mode.)
CHAOS SWING BUTTON
6
Used to stop or start louver movement and set the
desired up/down airflow direction.
ON/OFF TIMER BUTTONS
7
Used to set the time of starting and stopping operation.
TIME SETTING BUTTONS
8
Used to adjust the time.
TIMER SET/CANCEL BUTTON
9
Used to set the timer when the desired time is obtained
and to cancel the Timer operation.
SLEEP MODE AUTO BUTTON
10
Used to set Sleep Mode Auto operation.
ENERGY-SAVING COOLING MODE BUTTON
11
(OPTIONAL)
Used to set Energy-Save in cooling mode.
AIR CIRCULATION BUTTON(OPTIONAL)
Used to circulate the room air without
cooling or heating (turns indoor fan on/off).
ROOM TEMPERATURE CHECKING BUTTON
12
Used to check the room temperature.
PLASMA(OPTIONAL)
13
Used to start or stop the plasma-purification function.
HORIZONTAL AIRFLOW DIRECTION CONTROL
14
BUTTON (NOT ON ALL MODELS)
Used to set the desired horizontal airflow direction.
RESET BUTTON
15
Used prior to resetting time or after replacing batteries.
2nd F BUTTON
16
Used prior to using modes printed in blue at the bottom
of buttons.
AUTO CLEAN(OPTIONAL)
17
Used to set Auto Clean mode.
-39-