Getting Started - Sylvania SYTAB10ST User Manual

Getting Started

1. CHARGING YOUR DEVICE
Plug the power adapter into an electrical outlet and connect your device to
the adapter. It is recommended that you fully charge the battery before use,
for at least six hours.
2. TURNING YOUR DEVICE ON
Press the power button on the top of the device to turn it on. You can use the
device while the battery is charging. To turn the power o , hold the power
button of your device for about ve seconds. Then slide Power O when it
appears on the screen, followed by OK.
Sleep Mode: Your device will go into sleep mode after a period of inactivity
3. CONFIGURING THE TOUCH SCREEN
Press the MENU button on the top of the product.
1.
Tap Settings on the bottom menu.
2.
Scroll down and tap Touch Screen Calibrate.
3.
4. Use the stylus to tap the middle of the displayed crosshairs
to calibrate the touch screen.
Note: After a system reset, it may be necessary to re-calibrate your screen.
4. INSERTING AN SD CARD
Using an SD Card allows you to import other les, download applications and
play stored media.
MIC
Top
6:30
Friday, May 13
or if ON/OFF button pressed. (Go to Settings, under display to
modify the sleep time.) To get out of sleep mode, press the
power button to start using it again.
Power Key
ON/OFF, Sleep Button
+
PM
SYTAB10ST
3