Getting Started; Charge Your Device - Sylvania SYNET7LP Quick Start Manual

Getting Started

1. CHARGE YOUR DEVICE

Plug the power adapter into an electrical outlet and
connect your device to the adapter. It is recommended that
you fully charge the battery before use, for at least six
hours.
2. TURN DEVICE ON
Press the power button on the back of the device to turn
on. You can use the device while the battery is charging.
To turn the power off, hold on to the power button on the
back of your device for about three seconds. Then tap
power off followed by OK.
3. CONFIGURE TOUCH SCRE EN
1. Press the MENU button on the back of the product.
2. Tap Settings on the bottom menu.
3. Scroll down and tap Touch Screen Calibrate.
4. Use the stylus to tap the middle of the displayed
crosshairs to calibrate the touch screen.
Note: After a system reset, it may be necessary to re-
calibrate your screen.