Reflecting The Image; Rear Screen Projection - NEC MultiSync MT1035 User Manual

Ofrecido por www.electromanuales.com
If your projector is mounted on the ceiling and your image is
upside down, use the "Menu" and "Select" buttons on your
projector cabinet or ( ) ( ) buttons on your remote control to
correct the orientation. (See page E-32.)

Reflecting The Image

Using a mirror to reflect your LCD projector's image enables
you to enjoy a much larger image. Contact your NEC dealer if
Mirror
you need a mirror.
If you're using a mirror and your image is inverted, use the
"Menu" and "Select" buttons on your projector cabinet or ( )
( ) buttons on your remote control to correct the orientation.
Screen
(See page E-32.)

Rear Screen Projection

You can use your MultiSync MT1035 LCD projector to project
an image from the rear onto a transparent screen. The distance
the projector must be from the screen is the same as if you were
projecting the image from the front. Contact your NEC dealer if
you need a transparent screen.
If you're projecting the image from the rear and your image is
inverted, use the "Menu" and "Select" buttons on your projector
cabinet or ( ) ( ) buttons on your remote control to correct the
image. (See page E-32 .)
E-20