Table of Contents
Advertisement
If your projector is mounted on the ceiling and your image is upside down, use
the "Menu" and "Select" buttons on your projector cabinet or ( ) ( ) buttons
on your remote control to correct the orientation. (See page 70.)
Reflecting The Image
Using a mirror to reflect your LCD projector's image enables you to enjoy a
much larger image. Contact your NEC dealer if you need a mirror.
If you're using a mirror and your image is inverted, use the "Menu" and
"Select" buttons on your projector cabinet or ( ) ( ) buttons on your remote
control to correct the orientation. (See page 70.)
Rear Screen Projection
You can use your MultiSync MT830/1030 LCD projector to project an image
from the rear onto a transparent screen. The distance the projector must be
from the screen is the same as if you were projecting the image from the front.
Contact your NEC dealer if you need a transparent screen.
If you're projecting the image from the rear and your image is inverted, use the
"Menu" and "Select" buttons on your projector cabinet or ( ) ( ) buttons on
your remote control to correct the image. (See page 70 .)
INSTALLATION
Screen
43
Mirror
44
Advertisement
Table of Contents
