Special Applications; Safety Features - Bosch Washing machine Instruction Manual

Special applications

Soaking
•Insert washing of the same colour.
•Pour soaking agent into dispenser
according to the manufacturer's
instructions.
•Select the "Pesados/Algodón frio"
programme.
•Press the "Inicio" (Start) button.
The programme starts.
•After approx. 10 minutes press the "Inicio"
(Start) button.
The washing is now in the water.
•After the required soaking time select and
start a programme.
No additional detergent required, the
soaking solution is used for washing.

Safety features

Lid opening safeguards:
After the programme starts, the appliance lid
is locked.
After the programme ends or during "Rinse
Stop", the lid is unlocked.
Depending upon the model: Depending upon
the model, if a "Delayed Start" was
programmed, the lid remains unlocked
during the entire waiting period before the
start of the programme.
If the lid is to be opened during the
programme, quickly push the "Start" - button
and wait approximately 1 to 2 minutes until
the lid safety unlocks.
In order to avoid scalding, the lid remains
locked until the wash water has cooled
down somewhat.
Water safeguards:
During operation, the constant water level
control prevents possible overflows.
Starching
The washing should not be treated with
fabric softener.
II
•Insert the washing.
•Dose a quantity of starch for approx. 15
litres of water.
Dissolve starch according to the
manufacturer's instructions.
•Select the "Flot" programme.
•Set the spin speed.
•Pour starch solution into dispenser
•Press the "Inicio" (Start) button.
Dyeing / Bleaching
Do not dye too frequently. The salt can have
an aggressive action on stainless steel!
Respect the indications of the manufacturer
of the dye!
Never bleach washing in the washing
machine.
Spin safeguards:
The washing machine is equipped with
a safety feature that can reduce the spin
speed if imbalanced loading occurs.
In this case, the laundry may be insufficiently
spun dry. Evenly distribute the laundry in the
drum and programme a new spin cycle.
Safeguards against excess
foaming:
Too much foam may be produced in your
washing machine during spinning.
In this case, the spinning is stopped and the
machine is drained.
The programme continues. The spin speed is
adjusted and an additional rinse cycle is
performed.
20
.