Troubleshooting Guide - Kenwood KAC-X1R Instruction Manual

Troubleshooting Guide
What might appear
to
be a malfunction in your unit may just be the result ofslight misoperation
or
miswiring. Before calling service, first check the following
table for possible problems.
(Blown fuse.)
The output level is too small
(or too large).
• Input (or output) cables
• Protection circuit may be
• Volume is too
speaker shorted.
• The input sensitivity adjusting control
position.
The sound quality is bad.
(The sound is distorted.)
The Remote Controller does
not function.
~ecifications
• The wire are connected with wrong
8:)
/(3polarity.
• A wire pinched by screw in the car body.
switches may be improperly.
Remote Cable is disconnected.
• Connect them properly checking the of the terminals
and wires well.
• Connect the speaker wire again so that it is not pinched by
• Set properly by referring to <Controls>.
• Connect the Remote Cable securely and correctly.
Specifications subject
to
change without notice.
CEA-2006
RMS Watts
Signal to
THD+N ovv W x 1
into dBA
Rated
UUq.JL.ll L'-tVV
W
.............400W
xl
nLJ} OL.IVW
'1}
> 800W xl
ILJ}
u\.JvW xl
...............................................................................................................................................................................................C)vvW xl
)LJ}
1200W xl
'1}
:2:
lOOOWx 1
General
Weight .
8
English