WATER DELIVERY SYSTEM
CAUTION
When storing the saw where temperatures may drop
below freezing, blow out the water lines to prevent
damage to the water delivery system.
1. Connect the water supply hose to the water inlet
(garden hose) fitting on the left side of the saw (Figure
5, Item 21).
2. Verify that the water hose on the saw is connected to
the blade guard, (Figure 14), and that the water hoses
or tubes are pointed into both blade flanges.
3. Ensure that the hose ends maintain a 45
maintain a light contact with the surface of the blade.
PAGE30 — SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09)
WATER DELIVERY SYSTEMS
o
angle and
Figure 20. Large Bladeguard Water Tube
The lever on the left side of the control panel
regulates water flow volume. The lever on
the right side of the control panel turns the
water ON and OFF.