Controls And Indicators - MULTIQUIP StreetPro SP706016 Operation Manual

4
8
9
10
Figures 4 and 5 show the location of the controls, indicators
and general maintenance parts. The function of each control,
indicator or maintenance part is explained below.
1. FNR Handle — Use to engage the saw in a forward or
backward direction. Push handle forward to move the
saw forward; pull handle back to move saw backward.
2. Raise/Lower Switch — Use to lift or lower the front of
the saw (and blade if installed).
3. Blade Shaft RPM — Indicates blade shaft speed in
revolutions per minute.
4. Throttle Control — Controls the speed of the engine.
Turn knob counter-clockwise to increase engine speed.
Turn knob clockwise to reduce engine speed. For quick
throttle response, depress red button and push or pull
knob.
5. System Status — Allows operator to monitor engine
and electrical functions.
6. Ignition Switch — With key inserted turn clockwise
to start engine.
PAGE20 — SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09)

CONTROLS AND INDICATORS

16 7 15 6 5
6
7
5
150
175 8
4
125 200
9
100 100
230
3
255
10
75
280
11
2
50
305
12
330
1 25
13
355
380
14
0
0 MM 15
INCH
Figure 4. Controls and Indicators
7. Light Switch — When activated, turns on light. Lights
8. Depth Indicator — Indicates relative depth of blade in
9.
10. Left Water Flow Valve — Meters water supply.
11. Right Water Flow Valve — Opens and closes water
12. Water Pump Switch (Optional) — Toggle to turn pump
13. Emergency Stop Button — Press the RED emergency
14. Socket Connector — Use to plug in optional light.
15. Blade Shaft Engage/Disengage Switch — Toggle
16. Auxiliary Switch
17. Fuel Filler Cap — Remove this cap to add fuel.
18. Rear Access Panel — Remove to access items such as
14 17
18
offer better visibility when working indoors.
surface.
Depth Stop — Allows repeatable cutting depths.
supply to water supply system.
on or off.
stop button to shut the system down.
switch to engage or disengage the blade shaft drive.
the battery, hydraulic filter, etc.
3
13
12
11
2
1