IBM ThinkVision L190P User Manual page 18

Auto Image Setup for Windows 3.1, Windows 95, Windows 98,
Windows NT, Windows 2000, Windows Me or Windows XP
If the monitor is in standby
mode (STANDBY ON), it
may automatically turn off while
you are waiting for it to warm up.
The size and diversity of the
dot pattern varies with the
screen resolution.
Position the mouse pointer
at the bottom center of the
A
screen. This allows
UTO IMAGE
S
to run properly
ETUP
16
To optimize the displayed image automatically in Windows 3.1 , Windows 95,
Windows 98, Windows NT, Windows 2000, Windows Me, or Windows XP, do
the following:
1. Turn on the monitor first; then the computer.
If the message CHECK SIGNAL CABLE is displayed, or if nothing is
displayed, check:
• that the video interface cable is connected properly.
• the correct video adapter card is installed.
• the correct supported display mode is selected for your computer.
2. Wait approximately 15 minutes, until the monitor warms up.
3. Drag the icon bar and tool bar, if they are displayed, to the bottom of the
screen.
4. Insert the User's Guide and Installation Files CD into the computer CD-
ROM drive.
5. Check the operating system installed on your computer and follow the
instructions from the table below.
Operating system
Operating
System
Windows 3.1
Windows NT 3.5
Windows 95,
Windows 98,
Windows 2000,
Windows NT,
Windows Me or
Windows XP
6. When the test pattern appears, press the OSD Enter button
bottom of the monitor to display the initial OSD menu.
7. Use an Arrow button (
and press the OSD Enter button
8. Using an Arrow button (
OSD Enter button
which will optimize the display settings with the provided test pattern.
installation steps
Step1 Step2
Open Select
P F
ROGRAM ILE
M
ANAGER
Select
Select R
S
TART
or ) to select the Image Setup icon
to access the function.
or ), select
. This activates the
Step3 Step4
Select
Type
R
:\TESTPAT
UN
D
(change the
drive letter to
match your CD-
ROM drive if it
is not drive D)
UN
and press
ENTER
and press the
AUTOMATIC
procedure,
A S
UTO IMAGE ETUP
at the