Samsung 460 Installation Manual page 21

1. LocalSet
– Check the Current Localset.
– If you want to change the localset, select the Change.
– If you select the Skip, the Start screen appears.
2. Start - Easy Set Up
– If you select the Standalone Only, the Standalone hotel mode is set by default.
– Select the Standalone Plug & Play to go next step.
3. Select the Language
– Select the desired OSD(On Screen Display) language.
– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
4. Select the Country and Picture Mode
– Select the appropriate country and picture mode.
5. Auto Tuning
– Select the desired antenna source and channel type. Configure the settings and select the Scan.
– The Auto Tuning operation starts searching for channels
– When the Auto Tuning operation is completed, the channel information is displayed.
6. Clock
– Set the right time by setting the DST(Daylight Savings Time) and Time Zone.
7. TV Setup Compete
21
English