Samsung 460 Installation Manual page 16

No Item
REACH Server
update Time
REACH Update
Immediate
REACH Server
Channel
REACH Server
REACH
Version
13
Server
REACH Server
Group ID
S-LYNK REACH
S-LYNK REACH
Volume
TICKER
Self Diagnosis
for TV
14 Service
Upgrade Now
Service Pattern
TV Reset
✎
REACH(Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH server
product for the more information of operating.
16
English
initial value
Sub item
Standalone
OFF / 1hour /
2hour / 12:00 am
/ 2:00 am / 12:00
pm / 2:00 pm
On/Off
***
***
All, 1 - 511
On/Off
On/Off
On/Off
***
***
***
***
Description
Select the SIRCH update Time.
In the SIRCH update time , you have the option to
1hour
perform an automatic upgrade at 12:00 AM/PM or
at 2:00 AM/PM. You can perform hourly upgrades
at an interval of either 1 hr or 2 hrs.
• On : W henever the TV enters Standby mode,
always performs the SIRCH Update
Off
• Off : O nly performs the SIRCH Update at the
selected SIRCH Update Time
87
Select SIRCH Update Channel
Display the version of SIRCH Clone file currently
0000
updated in TV.
ALL
Select SIRCH Group ID
Off
Enable or Disable REACH Display
• On: T he TV sound in the current TV source is
continouly outputted even though the S-LYNK
REACH menu is displayed.
On
• Off: T he TV sound in the current TV source is
stopped when the S-LYNK REACH menu is
displayed.
• On: The TICKER contents is displayed.
Off
• Off: The TICKER contents is not displayed.
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If
the problem appears in the test picture, select Yes
and follow the directions on the screen.
-
• Sound Test: Use the built-in melody sound to
check for sound problems. If the problem occurs
during the test, select Yes and follow the directions
on the screen.
Upgrade the TV software.
-
Display Service pattern.
-
Reset the TV