Samsung LN-T5281F Owner's Instructions Manual page 18

Storing Channels in Memory (Automatic Method)
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
2. Press the ▲ or ▼ button to select "Auto Program", then press the ENTER button.
3. Press the ▲ or ▼ button to select the antenna connection, then press the
ENTER button.
Air: "Air" antenna signal.
Cable: "Cable" antenna signal.
Air+Cable: "Air" and "Cable" antenna signals.
4. When selecting the Cable TV system : Press the ENTER button to start the auto
program. By default, the cable TV system is set to "STD". If you want to select
another type of cable system, press the ▲ or ▼ button to select
"STD", "HRC" or "IRC".
STD, HRC and IRC identify various types of cable TV systems. Contact your
local cable company to identify the type of cable system that exists in your
particular area. At this point the signal source has been selected.
Press the ENTER button to start the auto program.
To stop the search before it has finished, press the ENTER button with stop
selected.
5. After all the available channels are stored, the "Auto Program" menu reappears.
Press the EXIT button to exit.
English - 16
TV Channel
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
LNA : On
Move Enter
TV Channel
Select the antennas to memorize.
Air
Cable
Air+Cable
Move Enter
Move Enter
TV Auto Program
Select the cable system.
Analog
STD Start
HRC
IRC
Digital
STD
HRC
IRC
Move Enter
Move Enter
Auto Program
Auto Program in Progress.
Cable Channel 0
Stop
Enter
Auto Program
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
Enter
►
►
►
►
►
►
►
►
Return
Start
Start
Start
Return
Return
Return
Return
0%
Return
Return