Parrot MKi9200 User Manual page 11

Synchronizing
the phonebook
Clearing the
memory
> If your mobile phone's model appears in the list, select it and
confirm by pressing the jog wheel.
> If your mobile phone model doesn't appear in the list, select
the Other phones
3. From your phone, search for Bluetooth peripherals. Refer to
your phone user guide for more information.
> The list of the available Bluetooth peripherals is displayed.
4. Select « Parrot MKi9200 » in the list.
5. Enter « 0000 » on your phone when you are prompted to enter
a PIN code.
> «Pairing successful» is displayed on the screen of the Parrot
MKi9200.
Once your phone is paired to the Parrot MKi9200, the connection
between both devices will be automatically established each time
you enter your vehicle if your screen is plugged in.
With some Bluetooth phones, the Parrot MKi9200 automatically
synchronizes the names and phone numbers in your mobile with its
phonebook. If your phone doesn't support automatic synchronization,
you can also send contacts from your mobile to the car kit via Object
Push. To do so:
1. Press the jog wheel and select
2. Refer to your phones 'user guide for more information about
sending contacts via Object Push.
You can pair up to 10 devices with the Parrot MKi9200.
If you attempt to pair an 11
displayed on the screen of the Parrot MKi9200. You must then delete a
phone from the paired devices list. To do so, press the rotator and
select Settings > Bluetooth > Paired
Parrot MKi9200 – User guide
option.
Phone > Receive contacts.
th
phone, the « Memory full » message is
devices.
11