Table of Contents
Advertisement
T50_setup.fm Page 19 Thursday, August 9, 2001 11:09 AM
Power Management
If your computer has
previously been used
with a CRT monitor and is
currently configured to a
display mode outside the
range that the Flat Panel
monitor can display, you
may need to re-attach the
CRT monitor temporarily
until you have re-configured
the computer, preferably to
1024 x 768 at 60Hz.
Product Disposal
To benefit from power management, the monitor must be used in conjunction
with a computer that implements the Video Electronics Standards Association
(VESA) Display Power Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes
that you have not used your mouse or keyboard for a user-definable period.
There are several states as described in the table below.
®
As an
Partner, IBM has determined that this product meets the
E
S
NERGY
TAR
®
guidelines for energy efficiency.
E
S
NERGY
TAR
IBM recommends that you switch off your monitor at the end of each working
day, or whenever you expect to leave it unused for long periods during the
day.
Power
State
Indicator
On
Steady green
Active Off
Steady amber
‡ There may be a slight delay before the picture reappears.
The fluorescent lamp in the liquid crystal display contains mercury. Dispose of
it as required by local ordinances and regulations.
Restoring
Screen
Operation
Normal
Press a key or
Blank
move the mouse. ‡
Compliance
®
E
S
NERGY
TAR
and NUTEK
19
Advertisement
Table of Contents
