Klv-37S550A - Sony KLV-26S550A Service Manual

KLV-32S530A, 26, 32, 37 S550A
RM-GA016W

5-3. KLV-37S550A

5-3-1. Wire Dressing overview.
Non-CISPR model
P4
P3-4
5-3-2. Insert Connector Assy 10P and SP Connector Assy 4P
1) Insert Connector Assy 10P to HT1 PWB. Attach HT1 PWB to Light Guide on Bezel.
2) Insert SP Conn Assy 4P to speaker as shown.
Attach Sheet Core, C (X1) as shown.
1
5-3-3. Insert Connector Assy 10, SP Connector Assy and attach C Sheet Core
1) Insert Connector Assy 10P to SW unit. Attach SW unit to Bezel and dress with Tape (LCD) (X2).
2) Insert SP Conn Assy to speaker and attach Sheet Core, C as shown.
3) Attach Sheet Core, C to panel as shown.
RM-GA016
P
Conn Assy 10P (HT1 PWB)
behind speaker
Keep wire away from screw
hole --> Prevent wire from
being sandwiched by screw
when docking rear cover.
Dress Conn Assy 10P
1
(SW unit) using
Tape (LCD) (X2).
CISPR model
P5-6
P4
P3-4
Attach Sheet Core, C to SP Conn Assy 4P and Conn
Assy 10P. Use datum line to position Sheet Core, C.
Do not cover speaker hole with Sheet Core, C.
2
Dress SP Conn Assy 4P and Conn Assy 10P using Sheet Core, C.
Use datum line to position Sheet Core, C. Do not cover speaker hole
Do not cover speaker hole
Attach Sheet Core, C to SP Conn Assy 4P
3
and Conn Assy 10P to panel. Dress wires towards
bottom of panel as shown.
– 18 –
P
Left speaker
2
Conn Assy 10P (HT1 PWB)
behind speaker
Do not cover
speaker hole
Right speaker
with Sheet Core, C.
P5-6