Cisco Linksys X-Series User Manual page 15

Linksys X-Series
Internet Connection Type
Select the type of Internet connection your ISP provides from the drop-down
menu . The available types are:
• Automatic Configuration - DHCP
Static IP
•
• PPPoE
PPTP
•
• L2TP
Telstra Cable
•
Automatic Configuration - DHCP
The default Internet Connection Type is Automatic Configuration - DHCP
(Dynamic Host Configuration Protocol) . Keep the default only if your ISP
supports DHCP or if you connect using a dynamic IP address . (This option
usually applies to cable connections .)
Static IP
If you are required to use a fixed IP address to connect to the Internet, select
Static IP .
PPPoE
If you have a DSL connection, check whether your ISP uses Point-to-Point
Protocol over Ethernet (PPPoE) . If so, select PPPoE .
Connect on Demand or Keep Alive—The Connect on Demand and Keep
•
Alive options let you choose whether the router connects to the Internet
only as needed (useful if your ISP charges for connect time), or if the
router should always be connected . Select the appropriate option .
PPTP
Point-to-Point Tunneling Protocol (PPTP) is a service that generally applies to
connections in Europe . If your PPTP connection supports DHCP or a dynamic IP
address, then select Obtain an IP Address Automatically . If you are required
to use a fixed IP address to connect to the Internet, then select Specify an IP
Address and configure the options below .
Connect on Demand or Keep Alive—The Connect on Demand and Keep
•
Alive options let you choose whether the router connects to the Internet
only as needed (useful if your ISP charges for connect time), or if the
router should always be connected . Select the appropriate option .
L2TP
Layer 2 Tunneling Protocol (L2TP) is a service that generally applies to
connections in Israel .
Connect on Demand or Keep Alive—The Connect on Demand and Keep
•
Alive options let you choose whether the router connects to the Internet
only as needed (useful if your ISP charges for connect time), or if the
router should always be connected . Select the appropriate option .
Telstra Cable
Telstra Cable is a service that generally applies to connections in Australia .
Network Setup
The Network Setup section configures the IP settings for your local network .
Wireless > Basic Wireless Settings
NOTE
To learn more about any field, click Help on the right side of the
screen .
The basic settings for wireless networking are set on this screen .
There are two ways to configure the Router's wireless network(s), manual and
Wi-Fi Protected Setup .
Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless
network . If you have client devices, such as wireless adapters, that support Wi-
Fi Protected Setup, then you can use Wi-Fi Protected Setup .
Configuration View To manually configure your wireless networks, select
Manual .
Advanced Configuration
13