IBM 6826 Hardware Maintenance Manual page 37

1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer.
2. Clear any cables that might impede the replacement of the cover.
3. Place the cover over the computer and slide it to the rear until it is fully closed.
Secure the cover with the two thumbscrews.
4. If your computer is being placed in the vertical position, attach the floor stand.
Attention: To prevent overheating and possible component damage, always
attach the floor stand when placing the computer in the vertical position.
5. Reconnect the external cables and power cords to the computer. See "Locating
connectors on the rear of the computer" on page 18.
6. To update the configuration, see "IBM Setup Utility program" on page 9.
Chapter 5. Installing Options
31