IBM TOTALSTORAGE NAS 200 User Manual page 100

3. 9C0rO1M0rB1}7|!q2~4,ME""4 Enter |#02~4,M
ServeRAID XFw
}GmP5w,qr>ZJCZ IBM ServeRAID-5i Ultra320 SCSI XFw"IBM
ServeRAID-4H Ultra160 SCSI XFwr IBM ServeRAID-4Mx Ultra160 SCSI XFw#
Sg1,mszkM{"ZA;OT>*Jdw BIOS f>sftSD;PD>#
g{ POST lb=XFwdC|Drlb=XFw2~Jb,A;OT>{"#N<Z
g{;P POST msrdCms{",BIOS A;{"`FZBfT>Dy>#"b,
zDf>I\kyT>Df>Py;,#
g{P POST msE",BIOS A;`FZBfT>Dy>#N<Z 87 3D
:POST(ISPR)ms}L;"bvJb#"b,zDf>I\kyT>Df>Py;
,#V{ XXXX 8> POST(ISPR)ms#
BfDy> BIOS A;T>dC4,MmsE"#
86
NAS 200 C'N<
E"1K%TBP==(f NAS 200 PD0_653\m1h8:
System Management Processor Communication
-> Built in Self Test Status ......
Boot Sector Code Revision ...
Main Application Code Revision
87 3D:POST(ISPR)ms}L;"D}Jb#
__________________________________
IBM ServeRAID BIOS
Copyright IBM Corp. 1995, 2001
Ver: 3.00.12 08/14/2000, 2001
__________________________________
Press Ctrl+I to access the Mini-Configuration Program.
Initializing ServeRAID Controller 1 in Slot 1.
Power-on self-test can take up to 59 Second(s) -- test Passed.
Drive configuration can take up to 6 Minute(s) 0 Second(s) -- test Passed.
ServeRAID Firmware Version:2.82.00
No logical drives found; none are installed.
Non-Disk SCSI Devices Found: CD-ROM 0, Tape 0, Removable-media 0, Other 1.
BIOS not loaded no devices found - Installation stopped.
__________________________________
IBM ServeRAID BIOS
Copyright IBM Corp. 1995, 2001
Ver: 3.00.12 08/14/2000, 2001
__________________________________
Press Ctrl+I to access the Mini-Configuration Program.
Initializing ServeRAID Controller 1 in Slot 1.
Power-on self-test can take up to 59 Second(s) -- test Failed.
Controller is not responding properly - Run Diagnostics.
Error Code: XXXX-YY
BIOS not loaded no devices found - Installation stopped.
: Passed
: Passed
:16, Build ID: CNET15A
:16, Build ID: TUET15A