Table of Contents
Advertisement
Wait For
Wait For
Prompt
Send
Send CR
Send User ID
Send
Password
Delay
Get IP
Prompt
End
4. Repeat steps 2 and 3 until the login script is complete.
5. Tap OK.
Page 182
Tells your organizer to wait for specific
characters from the TCP/IP server before
executing the next command.
Detects a challenge-response prompt coming
from the server and then displays the dynamically
generated challenge value. You then enter the
challenge value into your token card, which in
turn generates a response value for you to enter
on your organizer. This command takes two
arguments, separated by a vertical bar (|) on the
input line.
Transmits specific characters to the TCP/IP
server to which you are connecting.
Transmits a carriage return or LF character to the
TCP/IP server to which you are connecting.
Transmits the User ID information entered in the
User ID field of the Network Preferences screen.
Transmits the password entered in the Password
field of the Network Preferences screen. If you
did not enter a password, this command
prompts you to enter one. The Password
command is usually followed by a Send CR
command.
Tells your organizer to wait a specific number of
seconds before executing the next command in
the login script.
Reads an IP address and uses it as the IP address
for your organizer. This command is used with
SLIP connections.
Opens a dialog box and prompts you to enter
text of some kind (for example, a password or a
security code).
Identifies the last line in the login script.
Setting Preferences for Your Organizer
Advertisement
Table of Contents
