Call Preferences Menu For Sip Phones - Cisco 7941G Administration Manual

Call Preferences Menu for SIP Phones

Option
Proxy Port
Shared Line
Related Topics
Display Settings Menu, on page 60
Device Configuration Menu, on page 84
Call Preferences Menu for SIP Phones
The Call Preferences menu displays settings that relate to the settings for the call preferences on the SIP Phone.
The following table describes the options in this menu.
Table 17: Call Preferences Menu Options
Option
Caller ID Blocking
Anonymous Call Block
Call Waiting Preferences
Call Hold Ringback
Stutter Msg Waiting
Call Logs BLF Enabled
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
88
Description
The value is left blank because it is not
applicable to SIP Phones that are using Cisco
Unified Communications Manager.
Displays if the line is part of a shared line (Yes)
or not (No).
Description
Indicates whether caller ID
blocking is enabled (Yes) or
disabled (No) for the phone.
Indicates whether anonymous call
block is enabled (Yes) or disabled
(No) for the phone.
Displays a sub-menu that indicates
whether call waiting is enabled
(Yes) or disabled (No) for each
line.
Indicates whether the call hold
ringback feature is enabled (Yes)
or disabled (No) for the phone.
Indicates whether stutter message
waiting is enabled (Yes) or
disabled (No) for the phone.
Indicates whether BLF for call
logs is enabled (Yes) or disabled
(No) for the phone.
Cisco Unified IP Phone Settings
To Change
Display only—cannot configure.
Display only—cannot configure.
To Change
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
Use Cisco Unified Communications
Manager Administration to modify.
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
From Cisco Unified Communications
Manager Administration, choose Device
> Device Settings > SIP Profile .
Use Cisco Unified Communications
Manager Administration to modify.