• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to securely tighten the three supplied
screws, otherwise the TV may fall down.
• Use an appropriate screwdriver to attach the
screws tightly without damaging the screw head.
• Please ensure the AC power cord is away from the
stand installation location when you attach the
stand.
• Do not touch the inner side of the bottom of the TV
stand to avoid being hurt.
3: Connecting an
aerial/cable/
VCR/DVD
recorder
Connecting an aerial/cable only
Coaxial cable
Connecting an aerial/cable/VCR/DVD
recorder with SCART
Scart lead
Coaxial cable
VCR/DVD recorder
(Continued)
Terrestrial signal
or cable
Coaxial cable
Terrestrial
signal or
cable
5
GB